Concrete Joint Sealer - Metzger/McGuire Spal-Pro RS 65 Polyurea Joint Sealer

Concrete Joint Sealant

Metzger/McGuire Spal-Pro RS 65 Semi-Rigid Polyurea Joint Sealant is a durable product that seals retail and commercial concrete floor facilities. Spal-Pro RS 65 Semi-Rigid Polyurea Joint Sealant is a rapid set, two-component polyurea polymer liquid of 100% solids content ideal for pedestrian and cart traffic.

Metzger/McGuire industrial and polished concrete floor joint fillers and repair and maintenance products have been setting the standard in our industry for decades. Metzger/McGuire has products that will protect and repair joints, cracks, surface defects, gouges, bolt holes, and more.

Basic Use: Metzger/McGuire Spal-Pro RS 65 Semi-Rigid Polyurea Joint Sealant was developed to seal floor joints in commercial/retail exposed concrete floors that are subject to pedestrian/cart traffic and very limited material handling traffic.

Advantages of Using Spal-Pro RS 65 Concrete Joint Sealant

• “Rapid-Setting” - At 70°F (21°C) Spal-Pro RS 65 can be opened to pedestrian traffic in as little as (30) minutes and full traffic in (60) minutes.
• Provides Anti-Microbial Protection - Spal-Pro RS 65’s anti-microbial additives inhibit the growth of microbes such as viruses, bacteria, or fungi.
• Colorfast - Spal-Pro RS 65 maintains a consistent color profile and resists fading and other discoloration under normal conditions.
• Can Be Used with Grinding/Polishing Systems - Unlike most sealants, Spal-Pro RS 65 should not smear under most concrete grinding/polishing conditions, and its rapid set properties allow for grinding/polishing operations to commence as early as 60 minutes after filler placement (at 70°F).
• Reduces Incidence of Filler Separation - Spal-Pro RS 65’s lower Shore A hardness provides greater lateral movement capability to reduce the occurrence of filler separation voids normally associated with semi-rigid joint fillers when concrete shrinkage/joint opening occurs.

When cured, it is a semi-rigid sealant with a hardness of Shore A64-69.

Spal-Pro RS 65 is NOT designed for Class 5-9 industrial floors.

subject to heavy loads and moderate to frequent material handling vehicles and traffic.

Spal-Pro RS 65 may exhibit bubbling and/or compromised adhesion if concrete or ambient moisture levels are high.

Spal-Pro RS 65 is designed for use in areas where final temperatures are from 32°F (0°C) to +120°F (49°C).

• Installation Instructions
• Tech Data Sheet
• Color Chart