Polyaspartic Floor Coatings Kit - Rockhard Poly 3 Gal. Kit

UV-Resistant Polyaspartic Topcoat

The versatile Rockhard Polyaspartic Floor Coating Kit can be used in residential, commercial, and industrial settings with heavy traffic, resulting in impressive results. Featuring a superior physical property and outstanding UV, chemical, and solvent resistance, the Rockhard Polyaspartic Floor Coating Kit is the perfect floor coating solution. Fast curing times and excellent adhesion allow Rockhard POLY to bond well with various surfaces.

Among professional contractors, this product is one of the best-sellers. In addition to not yellowing over time, it provides an excellent gloss surface. Concrete flooring, countertops, natural stone, steel, and wood surfaces are common applications for this material.

The Rockhard POLY polyaspartic coating can be used for garage floors, base coats for floors, or decorative finishes. Vinyl chip flooring (flakes), colored quartz flooring, and metallic epoxy flooring are excellent decorative floors.

Coverage Rates

Features and Benefits

• Longer working time
• Produces outstanding finishes
• Exhibits excellent physical properties
• Superior UV, chemical, and solvent resistance
• Designed to resist most battery acid spills
• Non-yellowing and excellent gloss retention
• Fast cure time with superior bonding properties
• Approved by the Canadian Food Inspection Agency (CFIA) and meets FDA and USDA requirements

Applications

• Protective topcoat applications
• Concrete floors
• Protection from UV rays
• Garage floors
• Aircraft hangar floors
• Maintenance facilities
• Industrial shop floors
• High-traffic facilities

Format: 3-gallon kit
Mix Ratio: 1:1 Ratio by Volume
Contents: Two-component, 83% solids
Material: Aliphatic Polyaspartic Polyurea Topcoat
Odor: Low Levels
Pot Life: 30 minutes
Mixing Time: 1:20 minutes
Working Time: 25-30 minutes
Drying Times: 2-4 Hours (Minimum), 12-24 Hours (Foot Traffic), 48 Hours (Heavy Traffic), 72 Hours (Maximum Chemical Resistance)

SUITABILITY SAMPLE:
Due to the condition of specific sites, always prepare an adequate number of test areas. Onsite sample approval is especially critical in substantial, heavy traffic situations or custom gloss control and coloration.

• Technical Data Sheet
• Safety Data Sheet (Part A)
• Safety Data Sheet (Part B)